Yamaha DX reface – FM Bass Preset Cheat Sheet
This preset is designed for a tight, punchy FM bass with a solid low end, a defined attack, and controlled harmonics. Perfect for funk, electro, 80s pop, house, synthwave, and hip-hop.
Algorithm
- Algorithm: One main stack + optional attack layer
Recommended structure:
- OP2 → OP1 (main bass stack)
- OP4 → OP3 (short attack layer)
Operator Settings
OP1 – Carrier (Bass Fundamental)
- Ratio: 1.00
- Level: 95
- Feedback: 0
- Velocity Sensitivity: +2
Envelope
- Attack: 0
- Decay: 30
- Sustain: 80
- Release: 20
Purpose:
A solid, clean low-end foundation.
OP2 – Modulator (Punch & Harmonics)
- Ratio: 1.00
- Level: 70
- Feedback: 15
- Velocity Sensitivity: +4
Envelope
- Attack: 0
- Decay: 20
- Sustain: 30
- Release: 10
Purpose:
Adds punch and harmonic definition without excessive metallic tone.
OP3 – Carrier (Attack / Presence Layer)
- Ratio: 2.00
- Level: 55
- Feedback: 0
- Velocity Sensitivity: +3
Envelope
- Attack: 0
- Decay: 15
- Sustain: 0
- Release: 5
Purpose:
Short transient click to help the bass cut through the mix.
OP4 – Modulator (Optional Bite)
- Ratio: 2.00
- Level: 45
- Feedback: 10
- Velocity Sensitivity: +5
Envelope
- Attack: 0
- Decay: 15
- Sustain: 0
- Release: 5
Purpose:
Extra snap on harder key strikes.
Global Settings
Performance
- Mode: Mono (recommended)
- Portamento: Off or very short
- Pitch LFO: Off
Keyboard Scaling (Optional)
- Slightly reduce operator levels in higher octaves to keep the bass clean and focused.
Effects (Keep It Tight)
Drive
- Amount: Very subtle or Off
FM bass sounds best when clean.
Chorus
- Off
Chorus can weaken bass definition.
Reverb
- Off or extremely low (<10%)
Playing Range & Style
- Best range: C1–C3
- Short, rhythmic notes work best
- Velocity-sensitive playing is essential
Quick Variations
Classic DX Bass (Round & Clean)
- OP2 Level → 60
- OP2 Feedback → 10
Aggressive Electro FM Bass
- OP2 Ratio → 2.00
- OP2 Level → 80
- OP2 Feedback → 20
Deep Sub FM Bass
- OP2 Level → 55
- OP3 Level → 0 (disable attack layer)
Slap-Style FM Bass
- OP3 Level → 65
- Shorter decay on OP3 and OP4
Troubleshooting
Too metallic?
→ Lower modulator level or feedback (OP2 / OP4)
Too weak?
→ Increase OP1 level or add a small amount of drive
Not punchy enough?
→ Shorten decay times on OP2 and OP3
Final Tip
A great FM bass should be:
Let the envelopes and performance do the work.
This patch provides a strong DX-style FM bass foundation that sits perfectly in modern and classic mixes.